Evinrude Outboard Parts

Pair of Evinrude / Johnson 582508 Ignition Coils

Pair of Evinrude / Johnson 582508 Ignition Coils

A pair of CDI ignition coils for Johnson / Evinrude engines from 4.5 to 60hp up to 1987. They come with ht leads and 3 pin connector, one ht lead...
£30.00
Add:
Points for Evinrude / Johnson Outboards

Points for Evinrude / Johnson Outboards

A set of points for older Johnson Evinrude pre CDI outboard engines. They are used but have plenty of life left in them. Price is for one point set...
£3.99
Add:
Rebuilt carburettor for Evinrude Lightwin 3hp Outboard Engine

Rebuilt carburettor for Evinrude Lightwin 3hp Outboard Engine

A rebuilt carburetor for a 1960's Evinrude Lightwin 3hp 2 stroke outboard engine, it has been tested on a working engine. It has had new float, float...
£55.00
Add:
Recoil Starter Unit for Evinrude Lightwin 3hp

Recoil Starter Unit for Evinrude Lightwin 3hp

A working pull start assembly for a 1960's Evinrude Lightwin outboard engine. It needs a clean up and respray but is a very usable and hard to find...
£24.99
Add:
Reeds for a 1960's Evinrude Lightwin Outboard Engine

Reeds for a 1960's Evinrude Lightwin Outboard Engine

A set of reeds and cover plate for a 1960's Evinrude 2 cylinder 2 stroke outboard engine. You will need to source the 2 gaskets required for this -...
£14.99
Add:
Side Panel for 1960's Evinrude Lightwin

Side Panel for 1960's Evinrude Lightwin

A lower side panel for a 1960's Evinrude Lightwin 3hp outboard in very good condition. These are quite hard to find intact now, this one has no...
£19.99
Add:
Tank / Recoil mount for 1960's Johnson / Evinrude 2hp

Tank / Recoil mount for 1960's Johnson / Evinrude 2hp

A tank and recoil mount for a 1960's Johnson or Evinrude single cylinder 2-4hp outboard engine. The decal is badly worn but it has no chips or cracks...
£10.00
Add:
Tiller arm for Johnson / Evinrude 1.2 or 2hp 1971-1988

Tiller arm for Johnson / Evinrude 1.2 or 2hp 1971-1988

A tiller arm and mounting hardware for a Johnson or Evinrude single cylinder 2 stroke outboard engine manufactured between 1971 and 1988.
£14.99
Add:
Transom Clamp Assembly 1980's Evinrude 4hp 2 stroke Outboard

Transom Clamp Assembly 1980's Evinrude 4hp 2 stroke Outboard

A complete transom clamp assembly from a 1980's Evinrude 4hp 2 stroke outboard engine, this was taken from a model 42B365, it has the part number...
£35.00
Add:
Your IP Address is: 52.204.98.217
Copyright © 2019 Lincolnshire Outboards. Powered by Zen Cart